Jining Huichuang Science and Trade Co

<3>.What is solid content?
The solid content, also known as the non-volatile matter content, refers to the amount of non-volatile matter contained in the paint, that is, the part of the dry paint film formed by the paint components after construction. The level of the content has an impact on the formed paint. The quality of the film is directly related to the use value of the coating. Generally expressed as mass percentage of non-volatile matter, it can also be expressed as volume percentage.
Composition and performance:
This paint is a two-component room-temperature curing epoxy paint composed of epoxy resin, scaly mica iron oxide ash, anti-rust additives, curing agents and other substances.
The paint film has good adhesion, flexibility, water resistance and rust resistance.
Usage:
This paint is suitable for moisture-resistant and corrosion-resistant steel surfaces as a high-performance anti-rust primer and protective primer film (such as epoxy zinc-rich primer, inorganic zinc-rich primer ) can increase the protective performance of the entire coating.
Color: gray
Flash point: about ℃
Drying time: ℃ relative temperature surface drying less than or equal to hours solid drying hours fully cured days
Coating matching and construction
Front matching primer: epoxy zinc-rich primer, etc.
, Back-end matching topcoat: epoxy asphalt topcoat, epoxy topcoat, chlorinated rubber topcoat, etc.
Before painting, first mix the two components of paint and B according to the specified proportion, stir and mature for half an hour, and then the painting construction can be carried out.
. Paint preparation: The ratio of the host (component) to the curing agent (component B) is the ratio. The pot life of the paint after preparation is microns below ℃. The painting interval is hours at ℃ temperature.
The paint can be applied by brushing, rolling and high-pressure airless spraying.
According to the selected construction method, use special epoxy thinner to adjust the viscosity.
. Note: The construction temperature is lower than ℃ and the reaction will be slow.
Packing specifications:
Paint slurry (component):/barrel
Curing agent (component B):/barrel
Storage period: one year
Storage, transportation and Safety:
The storage period of this product is one year. After the expiration date, the product can still be used if the product quality meets the technical specifications.
This product can be stored in a ventilated and dry warehouse, protected from direct sunlight, isolated from fire sources, away from heat sources, and protected from rain, magnetism, impact, etc.
Jining Huichuang Technology Development Co., Ltd. specializes in the production of various types of heavy-duty coatings such as anti-corrosion coatings, high-temperature resistant coatings, fire-retardant coatings, industrial floor coatings, oil tank electrostatic conductive coatings, cool glue insulation paint and special oil-resistant coatings. Anticorrosive paint, anticorrosive coating! The company is an economic entity integrating scientific research, production and marketing, with an annual production capacity of more than tons.
Our main products are: epoxy paint, epoxy floor paint, high temperature resistant paint, fluorocarbon paint, glass flake paint, electrostatic conductive paint, acrylic paint, polyurethane paint, coal pitch anti-corrosion paint, road marking Paint, road marking paint, special resistant paint and other heavy-duty anti-corrosion paint, anti-corrosion coatings.
The company is located in Jining High-tech Zone, the hometown of Confucius and Mencius and the capital of canals. It is adjacent to the Beijing-Hangzhou Grand Canal and the Yanzhou Railway Junction. It has convenient transportation and developed logistics, which can ensure the normal receipt and delivery of various goods.
The company has a scientific research center and has long-term cooperation with higher scientific research institutions such as Shandong University School of Chemical Engineering, Shandong University of Science and Technology Coatings Research Institute, Shandong Architectural Research Institute, etc. After years of development and accumulation, it has rich experience in special coating production and techinque level.
The company has always been based on the concept of honesty, quality service, and being a good person before doing things. It pursues the entrepreneurial spirit of pioneering innovation and excellence, constantly improves product quality and service levels, and pursues first-class products and first-class services. Serve the majority of users!
Our company sincerely welcomes users and colleagues from all walks of life to visit our factory for inspection, negotiation and consultation!